DAKOTA ULTRASONIC-CMX DL The CMX DL+vv2.02.0

A/B Scan Material & Coating Thickness Gauges

Measuring
Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) measures from 0.025 in. to 100 ft. (0.63 mm to 30.48 M).
Pulse-Echo Coating Mode (PECT) – (Material, Coating, Pit & Flaw Detection);
Material: 0.025 in. to 100 ft. (0.63 mm to 30.48 M). Coating: 0.001 to 0.100 in (0.01 to 2.54 mm).
Pulse-Echo Temp Comp Mode (PETP) – (Pit & Flaw Detection) Auto temperature compensation – measures from 0.025 in. to 100 ft. (0.63 mm to 30.48 M).
Echo-Echo Mode (E-E) – (Thru Paint & Coatings) measures from 0.100 to 6.0 in (2.54 to 152.4 mm). Range will vary +/- depending on the coating.
Echo-Echo Verify Mode (E-EV) – (Thru Paint & Coatings) measures from 0.100 to 1.0 in (2.54 to 102 mm). Range will vary +/ depending on the coating.
Coating Only Mode (CT) – (Coating Thickness) Measures from 0.0005 to 0.100 in (0.0127 to 2.54 mm). Range will vary +/- depending on the coating.
Resolution: +/- 0.001 in (0.01mm). +/- 0.0001 in (0.001 mm).
Velocity Range:
0.0122 to 0.7300 inches/µs
309.88 to 18542 meters/sec
Single and Two point calibration option for material & coating, or selection of basic material types.
Units: English & Metric

Transducer
Transducer Types:
Dual / Single Element (1 to 20MHz).
Contact, matching layer, delay line, and pencil configurations.
Locking quick disconnect “00” LEMO connectors.
Standard 4 foot cable.
Custom transducers & cables lengths available for special applications.